AnglePlates

Angle Plates
 
 Special design
 
Angle Plate
TypeWN
 
 Angle Plate
TypeWS
 
Angle Plate
TypeWSN 		   

 
Angle Plate TypeWSN
BWith its relatively light weight this angle is suited as angle plate for machine tools and equally can be used for control and marking purposes. The vertical work face and the base are machined to DIN 876 for flatness and DIN 875 for angular accuracy, the ends are also machined. Horizontal T-slots in the vertical face are to DIN 650 with the slot width tolerance to H 12.The base has cast clamping slots. The back face of this angle is webbed stabel.
 
Aufspannwinkel Aufspannwinkel
Nr. 1 2 3 4 5 6 7 8 9 10 11
A
ap. mm		 100 150 250 300 400 500 520 600 800 1000 1250
B
ap. mm		 150 200 300 400 500 600 700 800 1000 1200 1500
C
ap. mm		 75 100 150 225 300 350 390 450 600 700 900
Weight
ap. kg		 5 12 32 58 115 180 260 350 605 1250 2200
Number
of T-slots		 2 2 3 3 4 4 4 5 5 6 8
T-slots
DIN 650		 10 12 12 18 18 18 22 22 22 22 22
T- slot
spacing
ap. mm		 40 70 75 100 100 100 100 100 150 150 150
T- slot
distance
from
side
ap. mm		 30 40 50 50 50 100 110 100 100 125 100
Buttom
Slots
width		 18 18 18 22 22 22 24 24 30 30 30
Prices on application.

nach oben