Straighteningplates

Solid Straightening plates
Type RM

Solid Straightening plates Type RM
STOLLE straightening plates are made from a special cast iron/steel alloy giving an exeptional strength and durability.

The top surface of the plate is planed or milled, the four side surfaces are machined right-angled.

Additional optional features at extra cost include cast or drilled holes for bending or folding pipes, frames, etc. As well it is possible to provide T-slots on request.
We recommend our plate support frame UU or mounting on VS supports. Unless stated otherwise, we deliver support frames or VS type supports to give a working height of approx. 800 mm.

Approx. plate size mm	Approx. plate thickness mm	Approx. weight kg
200 x 200	20 40	6 12
300 x 300	30 50	21 34
400 x 400	40 50	47 60
500 x 500	50 60	94 112
600 x 600	60 70	160 189
700 x 700	70 90	250 320
800 x 800	60 100	288 480
1000 x 800	80 100	480 600
1000 x 1000	80 100	580 730
1200 x 800	80 100	560 700
1200 x 800	90 110	810 990
1500 x 1000	100 120 140	1125 1350 1575
2000 x 1000	100 120 140	1500 1800 2100
2000 x 1500	100 120 140	2250 2700 3150
2500 x 1000	100 120 140	1830 2200 2600
2500 x 1500	110 130 150	3050 3600 4150
3000 X 1000	120 140 160	2660 3100 3550
3000 X 1500	120 140 160	4000 4660 5350
3000 X 2000	120 140 160	5330 6220 7100
4000 X 1500	120 140 160	5330 6220 7100
4000 X 2000	120 140 160	7100 8300 9500